Adapt-a-Stop-logo

AA-1. Adjustable Side Bolt-on Bracket

Adjustable Side Bolt-on Brackets provide the most flexibility for desired offsets when placed at floor level. The resulting load stop is extra strong, withstanding repeated impacts from forklifts and pallet jacks. (0" - 3" offset model in stock)

Adjustable-Side-Bolt-on-Brackets
  • Slide bracket to desired offset from upright beam then bolt in place
  • Pre-drilled holes provided for adjustable offset depths of 0″, 1.5″, or 3″
  • 11 gauge steel
  • Dimensions:
    • 7-3/4″ long x 3-1/4″ wide x 6″ high
  • Offset (between the face of upright beam to the front of the load stop beam):
    • Standard model provides 0”, 1.5”, or 3” offsets
    • Custom-made longer bracket provides 0”, 1.5”, 3”, 4.5″, 6″, or 7.5″ offsets
  • Powder coated yellow
  • Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
  • Nuts, Bolts, & Washers not included/sold
  • Prices (all prices subject to change without notice):
    • Standard model with 0″ to 3″ offsets is $38.75 ea. (in stock)
    • Contact us for pricing for a longer model with 0″ to 7.5″ offsets
    • Volume discounts available, contact us for a quote

As with all pallet rack manufacturers' uprights and horizontal beams, Adapt-a-Stop products must be correctly clipped on, screwed on, or bolted in place with minimum 3/8" bolts, washers, lock washers, and nuts to prevent them from loosening and possibly causing damage or injury. Adapt-a-Stop is not responsible for improper installation or use. Fire regulations require 6" flue space between pallets either between a wall or racks that are back to back. For higher placements, we recommend using either a Stand-Alone model or vertical & brackets since the AA-1 model & horizontal load stop may violate flue space, depending on pallet rack location.