AA-3a. Clip-on Stand-Alone Bracket

The Clip-on Stand-Alone Bracket provides easy installation with a 3″ offset between the face of the upright beam to the front of the load stop beam. Versatile and cost effective because the bracket can be used alone, or a vertical or horizontal strut beam can be added.

a3-Bracket
  • Pre-drilled holes provided for secure beam connections
  • 11 gauge steel
  • Dimensions: 6″ wide x 6 3/8″ deep x 10 3/4″ high
  • Offset: 3″ (between the face of upright to the front of the stop beam)
  • Other offset sizes available upon request (500 or more brackets required per order)
  • Powder coated yellow
  • Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
  • Screws, Nuts, Bolts, & Washers not included/sold
  • Price (subject to change without notice): $34.78 ea., volume discounts available, contact us for price quotes

As with all pallet rack manufacturers' uprights and horizontal beams, Adapt-a-Stop products must be correctly clipped on, screwed on, or bolted in place with minimum 3/8" bolts, washers, lock washers, and nuts to prevent them from loosening and possibly causing damage or injury. Adapt-a-Stop is not responsible for improper installation or use. Fire regulations require 6" flue space between pallets either between a wall or racks that are back to back. For higher placements, we recommend using either a Stand-Alone model or vertical brackets since the AA-1 model horizontal load stop may violate flue space, depending on pallet rack location.