AB-1b. Structural Bolt-on Bracket

Structural Bolt-on Brackets for bolt-on style load stop beams.

Structural Bolt-on Brackets provide flexibility for desired offsets for bolt-on style load stop beams. Will receive any style bolt-on beam needed.  Brackets can be stacked to increase offset.

  • Mount bracket to desired offset from upright beam, then bolt in place
  • Pre-drilled holes provided for adjustable offset depths
  • 11 gauge steel
  • Dimensions: 4″ high x 3″ wide x 10″ long
  • Offset: ¼”, 2-1/4”, 3-1/4”, or 4-1/4″ offset
  • Powder coated yellow
  • Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
  • Nuts, Bolts, & Washers not included/sold
  • This is a custom bracket, contact us for price quotes
  • 200 or more brackets per order required

As with all pallet rack manufacturers' uprights and horizontal beams, Adapt-a-Stop products must be correctly clipped on, screwed on, or bolted in place with minimum 3/8" bolts, washers, lock washers, and nuts to prevent them from loosening and possibly causing damage or injury. Adapt-a-Stop is not responsible for improper installation or use. Fire regulations require 6" flue space between pallets either between a wall or racks that are back to back. For higher placements, we recommend using either a Stand-Alone model or vertical brackets since the AA-1 model horizontal load stop may violate flue space, depending on pallet rack location.