Products / More Brackets
AA-1L. Long Adjustable Offset Bracket
The custom-made Long Adjustable Offset Bracket is similar to the AA-1 bracket but provides even more offset options. The AA-1L easily handles multiple offset choices between the face of the upright beam to the front of the load stop beam.
- Pre-drilled holes in side flanges provided for secure upright beam connections
- 11 gauge steel
- Dimensions: 12″ long x 3-1/4″ wide x 6″ high
- Offset: 0”, 1.5”, 3”, 4.5″, 6″, or 7.5″ (between the face of upright to the front of the load stop beam)
- Powder coated yellow
- Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
- Nuts, Bolts, & Washers not included/sold
- A minimum of 400 custom-made AA-1L brackets are required per order, contact us for price quotes
AA-3a. Clip-on Stand-Alone Bracket
The Clip-on Stand-Alone Bracket provides easy installation with a 3″ offset between the face of the upright beam to the front of the load stop beam. Versatile and cost effective because the bracket can be used alone, or a vertical or horizontal strut beam can be added.
- Pre-drilled holes provided for secure beam connections
- 11 gauge steel
- Dimensions: 6″ wide x 6 3/8″ deep x 10 3/4″ high
- Offset: 3″ (between the face of upright to the front of the stop beam)
- Other offset sizes available upon request (200 or more brackets required per order)
- Powder coated yellow
- Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
- Screws, Nuts, Bolts, & Washers not included/sold
- Price (subject to change without notice): $34.78 ea., volume discounts available, contact us for price quotes
AA-3b. Screw-on Stand-Alone Bracket
The simply designed Screw-on Stand-Alone Bracket provides a 3″ offset between the face of the upright beam to the front of the load stop beam. Ideal when a smaller bracket profile is needed. Versatile and cost effective because the bracket can be used alone, or a vertical or horizontal strut beam can be added. (In stock)
- Pre-drilled holes provided for secure beam connections
- 11 gauge steel
- Dimensions:
- 2-hole model: 4″ wide x 5 3/8″ deep x 5 3/4″ high
- 6-hole model: 6″ wide x 5 3/8″ deep x 5 3/4″ high
- 6-hole punch deck model: 6″ wide x 6 3/8″ deep x 7 3/4″ high
- Offset: 3″ (between the face of upright to the front of the load stop beam)
- Other offset sizes available upon request (200 or more brackets required per order)
- Powder coated yellow
- Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
- Screws, Nuts, Bolts, & Washers not included/sold
- Choose (prices subject to change without notice):
- 2-hole model = $28.12 ea.
- 6-hole model = $28.67 ea.
- 6-hole punch deck model = $30.27 ea.
- Volume discounts available, contact us for price quote
AA-4. Vertical Strut Bracket (Holds 1 5/8" Strut Stop Beams)
Vertical Strut Brackets can be used on pallet rack bays in order to ensure flue space is kept clear and to protect warehouse items.(See connection drawing). Most fire code regulations require at least 6″ space between pallet material. Brackets can be used against a wall or on racks that are back to back combined with strut channel material such as Unistrut, Superstrut, etc.. (See top view drawing). See photo gallery for installation examples.
- Attach vertical Adapt-a-Stop brackets to desired horizontal pallet rack load beams, then secure in place with two 3/8″ x 4″ bolts, nuts, & washers. Then attach 1 strut channel against a wall or 2 strut channel beams to create vertical load stops for back to back load stops; automatically maintaining 6″ flue space for fire code regulations. (See connection details and top view drawing)
- Pre-drilled holes provided for strut channel load stop beam connection
- Choose from 3″, 4″, 6″, or 8″ models
- 11 gauge steel
- Dimensions:
- 3″ Model is 11-1/2″ long x 1 5/8″ wide x 3-1/2″ high
- 4″ Model is 11-1/2″ long x 1 5/8″ wide x 4-1/2″ high
- 6″ Model is 11-1/2″ long x 1 5/8″ wide x 6-1/2″ high
- 8″ Model is 11-1/2″ long x 1 5/8″ wide x 8-1/2″ high
- Note: side hole configurations vary depending on desired food safety and fire code compliance
- Offset:
- All models provide 3” offset (between the face of horizontal load beam to the front of the load stop beam).
- Other offset sizes available upon request (200 or more brackets required per order)
- Powder coated yellow
- Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
- Separately purchased floor mounting bracket highly recommended when using vertical load stop beam at ground level, or use with horizontal Adapt-a-Stop load stop beam
- Nuts, Bolts, & Washers not included/sold
- Prices (subject to change without notice):
- 3″ Model is $34.72 ea. (100 or more brackets required per order)
- 4″ Model is $38.19 ea. (100 or more brackets required per order)
- 6″ Model is $40.30 ea. (100 or more brackets required per order)
- 8″ Model is $43.74 ea. (100 or more brackets required per order)
- Volume discounts available, contact us for a quote
AA-5. Vertical Load Stop Bracket (Holds 3"-Wide Stop Beams)
Vertical Load Stop Brackets are used on higher pallet rack bays in order to ensure flue space is kept clear. (See connection drawing). Most fire code regulations require at least 6″ space between pallet material. Brackets can be used against a wall or on racks that are back to back combined with a vertical load stop bar. (See top view drawing). See photo gallery for installation examples.
- Attach vertical Adapt-a-Stop bracket to desired horizontal pallet rack load beam, then secure in place with two 3/8″ x 4″ bolts, nuts, & washers. Bracket can be attached to 2 vertical beams, making it possible to create a back to back load stop with a single bracket; automatically maintaining 6″ flue space for fire code regulations. (See connection details and top view drawing)
- Pre-drilled holes provided for slotted vertical load stop beam connection
- Choose from 3″, 4″, 6″, or 8″ models
- 11 gauge steel
- Dimensions:
- 3″ Model is 11-1/2″ long x 3″ wide x 3-1/2″ high
- 4″ Model is 11-1/2″ long x 3″ wide x 4-1/2″ high
- 6″ Model is 11-1/2″ long x 3″ wide x 6-1/2″ high
- 8″ Model is 11-1/2″ long x 3″ wide x 8-1/2″ high
- Note: side hole configurations vary depending on desired food safety and fire code compliance
- Offset:
- All models provide 3” offset (between the face of horizontal load beam to the front of the stop beam).
- Powder coated yellow
- Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
- Separately purchased floor mounting bracket highly recommended when using vertical load stop beam at ground level, or use with horizontal Adapt-a-Stop load stop beam
- Model sizes can range from 3″ to 8″ (500 or more brackets of the same size per order required)
- Nuts, Bolts, & Washers not included/sold
- This is a custom bracket, contact us for a quote
AA-8. Slotted Side Bolt-on Bracket
Slotted Side Bolt-on Brackets provide heavy duty connections for slotted style pallet racks.
- Set slotted bracket to desired height on upright beam, then bolt in place
- Pre-drilled holes in side flanges provided for secure upright beam connections
- 11 gauge steel
- Dimensions: 9″ long x 2-3/4″ wide x 8″ high
- Offset: 4” (between the face of upright to the front of the stop beam)
- Powder coated yellow (contact us for other color choices)
- Specify slotted pallet rack type when ordering
- Nuts, Bolts, & Washers not included/sold
- This is a custom bracket, contact us for price quotes
AB-1b. Structural Bolt-on Bracket
Structural Bolt-on Brackets for bolt-on style load stop beams.
- Mount bracket to desired offset from upright beam, then bolt in place
- Pre-drilled holes provided for adjustable offset depths
- 11 gauge steel
- Dimensions: 4″ high x 3″ wide x 10″ long
- Offset: ¼”, 2-1/4”, 3-1/4”, or 4-1/4″ offset
- Powder coated yellow (contact us for other color choices)
- Specify pallet rack type when ordering: Teardrop (as shown), Structural, Interlake, etc.
- Nuts, Bolts, & Washers not included/sold
- This is a custom bracket, contact us for price quotes